2 Blade Lycoming O-320/O-360 Ground Adjustable STOL Propeller

Improve your Aircraft’s performance with our 2 blade propeller designed specifically for Lycoming O-320 to IO-390 powered STOL aircraft such as Super Cubs and Zenich 750 Super Duty aircraft.  This propeller is manufactured using an internal pressure, closed mold system to produce a hollow, one piece blade.   This process yields very repeatable blades with maximum strength, durability, and low weight.  This propeller has the strength and durability to give you thousands of hours of trouble free flying.

This propeller features a co-cured bonded stainless steel leading edge for erosion and FOD protection.  The two piece hub is manufactured from aerospace grade aluminum and is shot peened for durability and anodized for corrosion protection.

Our Pitch Pin Hub System allows its users to set a broad range of pitches, using the system’s index pins to make adjustments. Simply loosen the hub clamping bolts, insert the desired pitch pin, set the blades against the pin, torque the mounting bolts and go flying!  The entire pitch change process takes less than 5 minutes.

This 2 blade propeller is suitable for use on the Lycoming O-235, O-290, O-320, O-360 and IO-390 engines.  We have tested it up to 205HP.  The blades can be trimmed from the maximum 82″ diameter to 78″ diameter.

We have 12″ and 13″ composite spinners available for this propeller. This propeller mounts with 3/8″, 7/16″  & 1/2 bolts only!  Please specify bolt size when ordering.

Up, up, and away! Introducing our new C82BG bush propeller blades. This ground adjustable propeller gives you the ability to cruise to your favorite STOL competition at low RPM's and quickly change the pitch to achieve red-line while sitting on the ground for maximum available takeoff power.

Posted by Sensenich Propeller Manufacturing on Friday, June 16, 2017

Special Features:

  • Internal pressure molded
  • Carbon Fiber construction
  • Advanced Manufacturing Process
  • 2 Blade Tractor
  • Pitch Pin Hub System
  • Co-cured Metal Leading Edge
  • 82″ – 78″ Diameter
  • Spinners Available
  • 3/8″, 7/16″ & 1/2″ Mount Bolts Available

$3,700.00

Request a quote

Select your options below and add the item to your 'Request for Quote' list. View your list to submit your request for quote.

Clear

Specifications:

Material

Engine Suitability

, , ,

Horsepower

Documents: