3 Blade Lycoming O-320/O-360 Ground Adjustable High Speed Propeller

Improve your Aircraft’s performance with our 3 blade propeller designed specifically for Lycoming O-320 to IO-390 powered high speed aircraft such as Van’s RV series and Glasair aircraft. This propeller is manufactured using an internal pressure, closed mold system to produce a hollow, one piece blade. This process yields very repeatable blades with maximum strength, durability, and low weight. This propeller has the strength and durability to give you thousands of hours of trouble free flying.

This propeller features a co-cured bonded stainless steel leading edge for erosion and FOD protection. The two piece hub is manufactured from aerospace grade aluminum and is shot peened for durability and anodized for corrosion protection.

Our Pitch Pin Hub System allows its users to set a broad range of pitches, using the system’s index pins to make adjustments. Simply loosen the hub clamping bolts, insert the desired pitch pin, set the blades against the pin, torque the mounting bolts and go flying! The entire pitch change process takes less than 5 minutes.

This 3 blade propeller is suitable for use on the Lycoming O-235, O-290, O-320, O-360 and IO-390 and similar engines. We have tested it up to 220HP. The blades can be trimmed from the maximum 68″ diameter to 64″ diameter.

We have a composite spinners available for this propeller to match up to the RV cowling. This propeller mounts with 3/8″ & 7/16″ & 1/2 bolts only! Please specify bolt size when ordering.

 

NOTE:

Sensenich carbon propeller hubs are not compatible with Sensenich metal propeller spacers of 4″ length.  We have been unable to locate a commercial source for long enough bolts to go all the way through the propeller hub and spacer.

Sensenich recommends Saber Manufacturing, which offers a 4″ spool propeller extension which fits on Lycoming 4 cylinder engines.  It is a double flanged propeller extension.

http://www.sabermfg.com/extensions.htm 

6″ diameter, 4″ length

Saber can also provide a bolt kit to mount the spool onto the engine.

 

Special Features:

  • Internal pressure molded
  • Carbon Fiber construction
  • Advanced Manufacturing Process
  • 3 Blade Tractor
  • Pitch Pin Hub System
  • Co-cured Metal Leading Edge
  • 68″ – 64″ Diameter
  • Spinners Available
  • 3/8″, 7/16″ & 1/2″ Mount Bolts Available

$5,130.00

Request a quote

Select your options below and add the item to your 'Request for Quote' list. View your list to submit your request for quote.

Specifications:

Material

Engine Suitability

, , ,

Horsepower

Diameter Reduction

, , , ,